SA-CCR · CRR3 · Worked example

SA-CCR worked example: EAD step by step

· 8 min read · Everix team

Short answer: for the first worked example in BCBS 279, a netting set of three unmargined interest-rate trades, SA-CCR gives a replacement cost of 60, an add-on of 347 and an exposure at default of 1.4 × (60 + 346.8) ≈ 569 (thousands). Below, every step is recomputed from the inputs so you can check your own implementation against it.

The Basel Committee published SA-CCR as BCBS 279 in March 2014, with worked examples in Annex 4a. The EU implements it in CRR Articles 274 to 280f. Reproducing Example 1 is the cheapest test there is: if your numbers differ, the problem is in your implementation, not in your data.

The inputs

One netting set, no margin agreement, no collateral. Amounts are in thousands of USD, as in BCBS 279.

For the swaption, S is the option expiry (the start of the underlying swap) and E is the end of the underlying swap.

1
Type
Interest rate swap
Currency
USD
Notional
10,000
Start S (y)
0
End E (y)
10
Delta
+1 (long the rate)
Market value
30
2
Type
Interest rate swap
Currency
USD
Notional
10,000
Start S (y)
0
End E (y)
4
Delta
−1 (short the rate)
Market value
−20
3
Type
Bought receiver swaption, 1y into 10y
Currency
EUR
Notional
5,000
Start S (y)
1
End E (y)
11
Delta
to compute
Market value
50

Step 1: replacement cost

Without a margin agreement, RC = max(V − C, 0), where V is the net market value of the netting set and C the net collateral held. Here V = 30 − 20 + 50 = 60 and C = 0, so RC = 60.

Step 2: supervisory duration and adjusted notional

For interest-rate trades the notional is scaled by a supervisory duration with a 5% discount rate:

SD = (exp(−0.05 × S) − exp(−0.05 × E)) / 0.05
1
S
0
E
10
Supervisory duration
7.8694
Adjusted notional d
78,694
2
S
0
E
4
Supervisory duration
3.6254
Adjusted notional d
36,254
3
S
1
E
11
Supervisory duration
7.4856
Adjusted notional d
37,428

Step 3: supervisory delta and maturity factor

Linear trades take a delta of +1 or −1. For the bought receiver swaption, a put on the swap rate, the Basel formula gives δ = −Φ(−d) with d = (ln(P/K) + ½σ²T) / (σ√T). With the example's forward rate P = 6%, strike K = 5%, supervisory volatility σ = 50% and expiry T = 1 year:

d = (ln(1.2) + 0.125) / 0.5 = 0.6146
δ = −Φ(−0.6146) = −0.2694

For unmargined trades the maturity factor is MF = √(min(M, 1 year) / 1 year). All three trades have a remaining maturity of at least one year, so MF = 1 throughout.

Step 4: hedging sets, buckets and effective notional

Interest-rate trades are grouped into one hedging set per currency, then into three maturity buckets by end date: up to 1 year, 1 to 5 years, over 5 years. Within a bucket, signed amounts D = δ × d × MF add up. Across buckets they are combined with fixed correlations:

EN = √(D1² + D2² + D3² + 1.4·D1·D2 + 1.4·D2·D3 + 0.6·D1·D3)
USD
Bucket 1 (≤1y)
0
Bucket 2 (1–5y)
−36,254 (trade 2)
Bucket 3 (>5y)
+78,694 (trade 1)
Effective notional
59,270
EUR
Bucket 1 (≤1y)
0
Bucket 2 (1–5y)
0
Bucket 3 (>5y)
−10,083 (trade 3: −0.2694 × 37,428)
Effective notional
10,083

For USD, the cross term is negative because the two swaps point in opposite directions: √(36,254² + 78,694² − 1.4 × 36,254 × 78,694) = 59,270. The EUR hedging set has one trade, so its effective notional is simply the absolute value.

Step 5: add-on

The interest-rate supervisory factor is 0.5%. Hedging sets in different currencies do not offset, so their effective notionals are added:

AddOn(IR) = 0.5% × (59,270 + 10,083) = 346.8

Rounded, this is the 347 published in BCBS 279.

Step 6: PFE multiplier

The multiplier gives partial credit for excess collateral or a negative market value:

multiplier = min{1; 0.05 + 0.95 × exp((V − C) / (2 × 0.95 × AddOn))}

Here V − C = 60 > 0, so the multiplier is capped at 1 and PFE = 1 × 346.8.

Step 7: exposure at default

EAD = 1.4 × (60 + 346.764386) = 569.470141 ≈ 569

BCBS 279 publishes 569. Using unrounded inputs, add-on = 346.764386 and EAD = 569.470141 (USD thousands), which rounds to 569. Intermediate displayed figures are rounded separately.

Summary

Replacement cost
Recomputed
60
BCBS 279 Example 1
60
Add-on (interest rate)
Recomputed
346.8
BCBS 279 Example 1
347
Multiplier
Recomputed
1
BCBS 279 Example 1
1
EAD
Recomputed
569.470141
BCBS 279 Example 1
569

Where implementations usually go wrong

  • Bucketing by maturity instead of end date. The bucket depends on the end date E of the trade (for a swaption, of the underlying swap). Trade 3 sits in the over-5-year bucket because E = 11.
  • Ignoring the start date. A forward-starting trade or a swaption has S > 0, which lowers the supervisory duration. Setting S = 0 overstates trade 3's adjusted notional.
  • Wrong delta sign. A bought receiver swaption is short the rate (negative delta). Flipping it moves trade 3 to the same sign as trade 1 in a different currency. That doesn't change this example's add-on, but it breaks netting in mixed books.
  • Offsetting across currencies. USD and EUR trades never net in the interest-rate add-on.
  • Forgetting the cap and floor. The multiplier never exceeds 1 and never falls below 0.05. Margined netting sets also use a different maturity factor and replacement cost formula.

EU specifics to check

The CRR follows BCBS 279 closely (α = 1.4 in Article 274, the same supervisory factor for interest rates), with a few EU-specific points:

  • Interest-rate and commodity option deltas. Since CRR3, Article 279a(1)(a) excludes options mapped to the interest rate and commodity categories from the generic Black-style formula above. The adopted interest-rate option formula is in Delegated Regulation (EU) 2021/931 and includes a shift for negative rates. CRR Article 279a(3) calls for further commodity-option technical standards; check applicability for your reporting date.
  • Proportionality. Article 273a allows the simplified SA-CCR (derivative business at most 10% of total assets and EUR 300 million) or the original exposure method (at most 5% and EUR 100 million), assessed monthly.
  • Investment firms. Firms under the IFR compute K-TCD with their own simpler formula unless their competent authority approves the CRR methods. See the K-TCD worked example.

Try it on your own trades

The free SA-CCR calculator shows every step above for a small netting set in your browser. For whole portfolios, the Everix SA-CCR module runs the full, simplified and original exposure methods with drill-down to the trade. The five BCBS 279 Annex 4a examples run in Everix's continuous integration on every change. Definitions of every term are in the glossary.

Sources: BCBS 279, The standardised approach for measuring counterparty credit risk exposures (March 2014), Annex 4a; Regulation (EU) No 575/2013, consolidated text of 1 January 2025, Articles 273a to 280f. This article is general information, not regulatory advice.

The Everix note

Get the next article by email

IFR, CRR3, SIMM changes and AI-ready risk data. Roughly monthly, double opt-in.

By subscribing, you ask for the Everix note. Confirm by email; unsubscribe any time. Privacy policy

Questions about your own portfolio?

Talk to the quants and engineers behind Everix — 30 minutes to check the fit.